AGATEC MR360R Site Display Machine Control Receiver

• Machine mounted receiver enabling one-person to do the grade checking
• Laser line detection is easy with the Large 360° detection window
• Arrows on receiver designate direction to reposition bucket or blade
• Depth is measured precisely with a built-in plumb indicator
• Mount on machine via magnet or clamp mount

AGATEC MD360R Remote Display Features:

• WIRELESS clear-panel remote display -- No messing with wires!
• Operates with MR360RA Receiver for in-cab display
• No need to leave cab to change receiver settings with the RF technology bi-directional communications
• Mounts with suction cups

The AGATEC MR360RA Receiver produces precise grade information for all visual machine control applications. It will detect the signal of any rotary laser from any angle with the the large 360° detection window. The MR360R Receiver has its own built-in vertical indicator which checks angle of the stick, indicating if it is plumb or under- or over-reaching. The MR360RA Receiver has plumb LED indicator and the MD360R Remote Display has direction arrows for setting the dipper stick plumb. Reducing under- and over-cuts saves money.

Other Features:

• The cutting edge can be monitored in its relation to the reference laser reference beam with LED indicators. There are seven display or indicator channels in coarse mode and nine in fine mode.
• The last signal received is stored in the memory. Arrows on the MD360R indicate which way to move the cutting edge to reach the desired reference plane.
• The AGATEC MR360RA Receiver includes the magnet mount, charger, and case. The MR360R Receiver can be purchased without the MD360R Remote Display, but for the most advantageous use of vertical indicator, using the remote display with direction arrows is required.

Mounts for AGATEC MR360R Receiver: In order to mount the MR360RA Receiver with clamps, weld a bracket to the machine, or also purchase the optional post or excavator mount.

AGATEC MD360R Wireless Remote Display:

• It tracks the receiver’s channels, plumb indicator arrows, plus ditch & bucket in the same view
• Receiver settings can be changed without the operator leaving the cab with the latest RF technology offering bi-directional communication.
• A suction cup mount is included for cab windshield along with a 12-24 volt power cord with accessory plug

Applications:

• Site preparation

--- The MR360R Receiver can be used with excavators or backhoes by attaching with magnets and with dozers, drag boxes, or skid steers with optional clamps.

--- Grades can be checked from cab by one-person.

Click here to view the  MR360R and MD360R Brochure.