AGATEC EZ Dig Pro Sensor System

The AGATEC EZ Dig Pro is an inventive instantaneous depth and grade control for excavators. The EZ Dig Pro makes it no longer necessary to discontinue excavating to position the bucket and dipper stick in the same place every time you need a precise reading. The EZ Dig Pro sensors take into consideration the change in position of the bucket, boom, and dipper stick providing you nonstop depth readings to keep the job moving.

From inside the cab, you can observe the control box and remote display permitting you to inspect the bucket, ditch, and display all at once. With no cables & magnetic sensors, it’s not necessary to drill or weld anymore the excavator, giving the portability and flexibility you need. Setup and calibration time takes less than 40 minutes for the first installation, and less than 5 minutes for daily startup.

AGATEC EZ Dig Pro Features:

• Powerful magnets eliminates the need for welding
• Wireless transmission eliminates the need for cables and wires
• EZDigPro can be installed and calibrated in less than 40 minutes with its patented Easy Calibration
• Daily start-up takes only 5 minutes.
• The transparent display that is setup in the user's cab has eight LEDs, multilingual, handles instinctively.
• Sensors are solar powered
• Excavate any slope ±300%
• The dipper stick sensor has a linear laser detector built right into it. The sensor resets the reference whenever the elevation of the machine changes.
• The EZDigPro increases the digging and grading effectiveness of the excavator as much as 70%
• Will maintain the setup data from five machines and nine buckets proving to be quick and unproblematic to shift from one machine to another.
• The most up to date accelerometer technology that is high-speed, precise, and robust for every day, rough use.

Get ready to use the EZDigPro in three easy steps:

1. Put the sensors into position
2. Calibrate the unit
3. Double check the calibration and start working!

Benefits of the EZDigPro includes:

• Saves time
• Increases accuracy
• Makes money

The EZ Dig Pro is a real-time wireless machine display system for backhoes & excavators. There are two systems to choose from including the EZ DIG PRO 3 Sensor System w/Laser Receiver and EZ DIG PRO 4 Sensor System w/Laser Receiver.

The AGATEC EZ Dig Pro 3 Sensor System includes:

• Angle Sensor (2 each includes Boom & Bucket Angle Sensors)
• Angle Sensor w/Laser Receiver
• Control Box
• Sensor Removal Tool
• Support Plate (3 each)
• Remote Display
• Laser Pointer & Magnetic Bracket
• Control Box Power Cable
• Universal 110/220V Charger
• Carrying Case

The AGATEC EZ Dig Pro 4 Sensor System includes:

• Angle Sensor (3 each includes Boom & Bucket Angle Sensors and Chassis Sensor for Pitch & Roll)
• Angle Sensor w/Laser Receiver
• Control Box
• Sensor Removal Tool
• Support Plate (4 each)
• Remote Display
• Laser Pointer & Magnetic Bracket
• Control Box Power Cable
• Universal 110/220V Charger
• Carrying Case

Click here to download the AGATEC Ez Dig Pro Brochure.